D.I.D. 428 BLACK Chain Non O-ring

Don't like the look of all those Gold chains, no problem we got you in Black!

Fitment

• Talaria MX5 - Chain cut required
• Altis Sigma - Chain cut required
  

Details

Designed for mini motocross racing with 5740 lbs/ft tensile strength.

Installation:

To install this chain it must be "cut" to the correct length which varies depending on the size of your sprocket.  You'll need a Chain Breaker Tool which you can buy here.  Another very helpful tool is this special pliers which makes removing and installing master links a snap!

Charged Advice

It's a well known motocross racing "secret" that an o-ring chain has far more friction in it and robs you of power, you'll notice a nice little power increase with this chain, perhaps even some range.  If you're racing your buddies, you'll have a competitive advantage to those running an o-ring chain.

If you upgrade to a larger sprocket and need a longer chain or have a wide tire and you are struggling with chain clearance, here is a simple solution, install a non-o-ring chain which will provide about 1mm of extra clearance between the tire and chain.  Be sure to use chain lube and keep your chain clean, without o-rings this is very important.