Renthal 428 R-1 Works Chain

Fitment

• Talaria MX5 - Chain cut required
• Altis Sigma - Chain cut required
  

Details

• Gold colored side plates and chromised bearing pins
• Shot peened alloy steel side plates
• Extended bushings reducing the friction between outer and inner link plates and maximizing power output
• Most perfectly matched chain for Renthal Chainwheels allowing maximum power at the rear wheel and extending the life of both the chain and chainwheels
• 4,609 lb. tensile strength
• Master Link included

Installation:

To install this chain it must be "cut" to the correct length which varies depending on the size of your sprocket, OEM is 108 links.  You'll need a Chain Breaker Tool which you can buy here.  Another very helpful tool is this special pliers which makes removing and installing master links a snap!

Charged Advice

It's a well known motocross racing "secret" that an o-ring chain has far more friction in it and robs you of power, you'll notice a nice little power increase with this chain, perhaps even some range.  If you're racing your buddies, you'll have a competitive advantage to those running an o-ring chain.

If you upgrade to a larger sprocket and need a longer chain or have a wide tire and you are struggling with chain clearance, here is a simple solution, install a non-o-ring chain which will provide about 1mm of extra clearance between the tire and chain.  Be sure to use chain lube and keep your chain clean, without o-rings this is very important.  

Renthal is a top name brand in the motocross racing industry known for high quality products.